how to unlock your globe tattoo e153u-2 or old e153 models

TOOLS OR THINGS NEEDED:

1. E153 UPDATE (DOWNLOAD AND EXTRACT THE EXE FILE AND SAVE TO DESKTOP)-HERE
2. HUAWEI FLASHER (DOWNLOAD RAR FILE AND SIMPLY RIGHT CLICK NO NEED TO INSTALL)-HERE
3. QUALCOMM QPST (DOWNLOAD RAR FILE AND INSTALL TO COMPUTER)-HERE
4. INTERNET CONNECTION WHEN USING HUAWEI FLASHER (A MUST! CONNECT VIA WIFI WHEN DOING THE PROCESS)
5. COMPUTER DESKTOP OR LAPTOP
6. BROADBAND TO UNLOCK GLOBE E153 MODELS
7. GUTS :)

PROCEDURE:

STEP 1: CLICK COMPUTER ICON FROM DESKTOP AND CLICK MANAGE

STEP 2: CLICK ON DEVICE MANAGER

STEP 3: CLICK PORTS AND REMEMBER THE PORT THAT WILL APPEAR MINE IS COM 8

STEP 4: OPEN QPST CONFIGURATION

STEP 5: CLICK IP SERVER AND CHECK ACCEPT CLIENT CONNECTIONS

STEP 6: CLICK PORTS AND CLICK TO ADD NEW PORT

STEP 7: UN-CHECK SHOW SERIAL AND USB/QC DIAGNOSTIC PORTS ONLY (BOX) AND SELECT THE PORT OF YOUR MODEM OBTAINED FROM STEP 3 THEN CLICK OK TO PROCEED

SAMPLE SCREEN SHOT

STEP 8: NOW CLICK ON START CLIENTS AND SCROLL TO SOFTWARE DOWNLOAD

STEP 9: YOUR PORT WILL BE DETECTED AS SHOWN BELOW IF NOT JUST CLICK BROWSE AND SEARCH FOR YOUR PORT (FROM STEP 3)

STEP 10: ONCE DETECTED SIMPLY CLICK ON BACKUP TAB AND SELECT WHERE YOU WANT TO SAVE (DESKTOP OR USB ETC)

STEP 11: EXIT QPST WHEN BACKUP IS COMPLETE, NOW YOU MAY OPEN HUAWEI FLASHER (USING THIS FLASHER WE NEED INTERNET CONNECTION TO BE ABLE TO SUCCESSFULLY FLASH OUR MODEM-YOU MAY TRY TO CONNECT VIA WIFI USING YOUR LAPTOP WHEN DOING THIS)

STEP 12: CLICK EXE FILE AND SCROLL TO YOUR PORT THEN CLICK ON SELECT FIRMWARE TAB

STEP 13: NOW CLICK EXTRACT FROM EXE AND OPEN WHERE YOU HAVE SAVED YOUR E153

STEP 14: YOU WILL NOW BE ASKED WHERE YOU WANT TO SAVE JUST CLICK ON DESKTOP FOR EASIER ACCESS

STEP 15: ONCE E153 IS SAVED UNCHECK #6 BIN AND CLICK ON FLASH MODEM AND CHOOSE NORMAL MODE

STEP 16: DURING THE FLASHING PROCESS YOU WILL BE ASKED TO SAVE OR BACKUP YOUR NVBACKUP MEMORY FILES JUST CLICK OK, ANOTHER TAB WILL POP UP AND WAIT UNTIL FOUND NEW HARDWARE IS DETECTED OR OBSERVE IF THE CURRENT PORT WILL CHANGE, MINE FROM COM8 TO COM10 THEN CLICK OK

STEP 17: ONCE YOU CLICK THE OK BUTTON WAIT UNTIL IT FINISHES TO WRITING 08 BIN , SOME WILL BE SUCCESSFUL AND PROCEED TO 09 BIN WHILE SOME WILL HAVE THIS "FAIL ACK 0X03" AT 08BIN, FOR THOSE WHO FAIL AT 08 BIN, SIMPLY CLOSE THE FLASHER AND OPEN AGAIN QPST TO RESTORE YOUR NVBACKUP

STEP 18: AGAIN SELECT THE PORT OF YOUR MODEM (JUST LIKE FROM STEP 6-7) CLICK ON START CLIENTS TAB AND CHOOSE SOFTWARE DOWNLOAD THIS TIME WE NOW SELECT THE RESTORE TAB (IT WILL AUTO DETECT YOUR BACKUP, IF NOT SIMPLY CLICK BROWSE AND LOCATE YOUR FILE). CLICK THE START BUTTON AND WAIT UNTIL IT SAYS MEMORY RESTORE COMPLETE AND THEN HIT THE EXIT BUTTON

STEP 19: AFTER SUCCESSFUL RESTORE YOUR MODEM WILL REBOOT AND WAIT IF NEW DEVICE IS DETECTED PROMPTING YOU TO OPEN EITHER THE AUTORUN.EXE OR TO YOUR DASHBOARD

STEP 20: NOW TRY TO INSERT SMART OR SUN SIMCARD TO YOUR GLOBE BROADBAND

SAMPLE SCREENSHOTS USING OTHER SIM CARDS

SAMPLE SLIDE

FOR THOSE WHO HAVE SMARTBRO e156C you may use Huawei unlcoker by bojs

HOW TO USE

THIS IS PERMANENT UNLOCK TO SMART BRO e156c